Conventional Width 60cm 33cm 30cm DTF Heat Transfer Film White Color

Product model: 1703-1

Description: Single side matte cold peel PET film, washable (45-60℃), high elasticity and bright light.

Application: DTF

Physical Characteristics:

Cautions:

1. Tear-off method: cool tear or hot tear.

2. The printing film is a soft product. A slight stickiness on the surface is normal, and the surfaces should be prevented from sticking to each other. 3. Reasonably control the temperature and pressing time. If the temperature is too high or the time is too long, it will easily cause discoloration or decrease in elasticit

 Our company is currently equipped with two ultra-low temperature freezer pulverizers imported from Germany, with an annual production capacity of 6,000 tons of TPU powder. . Eight sets of ultrasonic high-efficiency powder sieving machines can sieve TPU hot melt adhesive powder with different particle sizes such as 0-80μm/80-200μm/150-250μm/200-400μm/400μm and above. The TPU hot melt adhesive powder produced by the company has a Shore hardness of 55A/65A/75A/85A, etc. And is widely used in heat transfer (DTF, offset heat transfer), clothing, shoe materials, luggage, etc.

MAIN PRODUCTS

TPU hot melt adhesive powder

PES hot melt adhesive powder

PA hot melt adhesive powder

EVA hot melt adhesive powder

Double Side Matte DTF pet film

Singe Side Matte DTF pet film

Application:

It can be used all kind of fabric.

TPU hot melt adhesive powder product data

PES hot melt adhesive powder product data

PA hot melt adhesive powder product data